background image

48

MAIntenAnCe

The following table lists only supplemental maintenance items.  Please consult your Cannondale Bicycle 
Owner’s Manual for more information on basic bike maintenance. Consult with your Cannondale Dealer to 
create a complete maintenance program for your riding style, components, and conditions of use. Follow the 
maintenance recommendations given by the component manufacturers for the various non-Cannondale  
parts of your bike.

ITEM

FREQUENCY

HOUSING AND CABLES

 - Your bike has been supplied with  small 

adhesive frame protectors - 

KF103/

. Place this material on the  the 

frame between where cables and housing rub due to movement. 
Overtime, cable rubbing can wear into the frame itself causing very 
serious frame damage.  

NOTE: Damage to your bike caused by cable rubbing is not a condition 

covered under your warranty. Also, adhesive frame guards are not 

a  fix for incorrectly installed or routed cables or lines. If you find 

that applied guards are wearing out very quickly, consult with your 

Cannondale Dealer about the routing on your bike.  

BEFORE FIRST RIDE

DAMAGE INSPECTION

 - Clean and visually inspect entire bike frame/

swingarm/linkage assembly for cracks or damage.  See “Inspect For 
Safety” in your Cannondale Bicycle Owner’s Manual.

BEFORE AND AFTER EACH 

RIDE

CHECK TIGHTENING TORQUES

  - In addition to other component 

specific tightening torques for your bike. Tighten according to the 
TIGHTENING TORQUES information listed in this supplement.  

EVERY FEW RIDES

INSPECT BEARINGS, REPLACE WORN OR DAMAGED PARTS :

•  SHOCK LINK

•  SEAT STAY

•  MAIN PIVOT

IN WET, MUDDY, SANDY 

CONDITIONS EVERY 25 HRS.
IN DRY,  CONDITIONS  

EVERY 50 HRS.

FORK & SHOCK

 - Please consult the manufacturer’s owner’s manual for maintenance information for your 

fork .

WARNING

ANY PART OF A POORLY MAINTAINED BIKE CAN BREAK OR MALFUNCTION LEADING TO AN 

ACCIDENT WHERE YOU CAN BE KILLED, SEVERELY INJURED OR PARALYZED. 

Please ask your 

Cannondale Dealer to help you develop a complete maintenance program, a program which includes a  
list of the parts on your bike for YOU to check regularly. Frequent checks are necessary to identify the 
problems that can lead  to an accident.  

Содержание Jekyll 27.5
















Отзывы: