3
They only engage or disengage with a very specific
motion which must be practiced until it becomes
instinctive. Clipless pedals require shoes and
cleats which are compatible with the make and
model pedal being used.
Many clipless pedals are designed to allow the
rider to adjust the amount of force needed to
engage or disengage the foot. Follow the pedal
manufacturer’s instructions, or ask your dealer to
show you how to make this adjustment. Use the
easiest setting until engaging and disengaging
becomes a reflex action, but always make sure that
there is sufficient tension to prevent unintended
release of your foot from the pedal.
WaRninG
CliPless Pedals aRe intended foR
Use With shoes sPeCifiCally made
to fit them and aRe desiGned to
fiRmly keeP the foot enGaGed With
the Pedal. UsinG shoes WhiCh do
not enGaGe the Pedals CoRReCtly is
danGeRoUs.
Practice is required to learn to engage and
disengage the foot safely. Until engaging and
disengaging the foot becomes a reflex action, the
technique requires concentration which can distract
your attention and cause you to lose control and
fall. Practice engaging and disengaging clipless
pedals in a place where there are no obstacles,
hazards or traffic; and be sure to follow the pedal
manufacturer’s setup and service instructions. If
you do not have the manufacturer’s instructions,
see your dealer or contact the manufacturer.
4.f - BiCyCle sUsPension
Many bicycles are equipped with suspension
systems. There are many different types of
suspension systems — too many to deal with
individually in this Manual. If your bicycle has a
suspension system of any kind, be sure to read
and follow the suspension manufacturer’s setup
and service instructions. If you do not have the
manufacturer’s instructions, see your dealer or
contact the manufacturer.
WaRninG
failURe to maintain, CheCk and
PRoPeRly adJUst the sUsPension
system may ResUlt in sUsPension
malfUnCtion, WhiCh may CaUse yoU
to lose ContRol and fall.
If your bike has suspension, the increased speed
you may develop also increases your risk of
injury. For example, when braking, the front of a
suspended bike dips. You could lose control and
fall if you do not have experience with this system.
Learn to handle your suspension system safely.
See also SECTION 4.C.
WaRninG
ChanGinG sUsPension adJUstment
Can
ChanGe
the
handlinG and
BRakinG ChaRaCteRistiCs of yoUR
BiCyCle.
Never
change
suspension
adjustment
unless you are thoroughly familiar with the
suspension system manufacturer’s instructions
and recommendations, and always check
for changes in the handling and braking
characteristics of the bicycle after a suspension
adjustment by taking a careful test ride in a
hazard-free area.
