Can-Am Roadster RT-622 2010, Руководство по обслуживанию, Страница: 6 / 52

INTRODUCTION
INTRODUCTION
GENERAL INFORMATION
The information and component/system descrip-
tions contained in this manual are correct at time
of writing. BRP however, maintains a policy of
continuous improvement of its products without
imposing upon itself any obligation to install them
on products previously manufactured.
Due to late changes, there may be some differ-
ences between the manufactured product and the
description and/or specifications in this document.
BRP reserves the right at any time to discontinue
or change specifications, designs, features, mod-
els or equipment without incurring obligation.
This Service Manual covers the following BRP
Roadster RT-622 trailers.
MODEL COLOR MODEL NUMBER
Timeless Black T1AA, T1AE, T1AF
Orbital Blue T1AB, T1AD RT-622
Full Moon Silver T1AC
TRAILER INFORMATION
TRAILER IDENTIFICATION
The trailer is identified by a serial number. It may
sometimes become necessary to locate this num-
ber for warranty purposes or to trace the trailer in
the event of theft.
The serial number is located on the frame and can
be seen from the LH rear wheel housing.
704902071
rmo2010-005-006_a
WHEEL REMOVED FOR CLARITY PURPOSE ONLY
1. Trailer serial number
MANUAL INFORMATION
MANUAL PROCEDURES
As many of the procedures in this manual are
interrelated, we suggest that before undertaking
any task, you read and thoroughly understand the
entire section or subsection in which the proce-
dure is contained.
A number of procedures throughout the book re-
quire the use of special tools. Before undertaking
any procedure, be sure that you have on hand all
required tools, or approved equivalents.
This manual uses technical terms which may be
different from the
PARTS CATALOG
.
When ordering parts always refer to the PARTS
CATALOG .
MANUAL LAYOUT
The manual is divided into many major sections as
you can see in the main table of contents at the
beginning of the manual.
Each section is divided in various subsections, and
again, each subsection has one or more division.
The illustrations show the typical construction of
the different assemblies and, in all cases, may
not reproduce the full detail or exact shape of
the parts shown, however, they represent parts
which have the same or a similar function.
IV
rmr2010-061