Can-Am Roadster RT-622 2010, Руководство по обслуживанию, Страница: 49 / 52

Section 03 ELECTRICAL SYSTEM
Subsection 01 (LIGHTS AND HARNESS)
rmr2010-066-207_a
1. Turn signal light socket
2. Turn signal second light socket
3. Push and turn bulb to remove it from the
socket.
4. Install the new bulb.
4.1 Align bulb pins with socket notches.
4.2 Press the bulb in socket.
4.3 Turn bulb clockwise to lock it.
5. Reinstall socket in housing.
5.1 Align socket tabs with housing notches.
5.2 Insert socket in housing and turn socket
clockwise to lock it.
6. Reinstall inner fascias. Refer to
INNER FASCIA
in
BODY
section.
LICENSE PLATE LIGHT
License Plate Bulb Replacement
1. Remove the lens screws.
rmo2010-005-049_a
1. License plate light
2. License plate lens screws
2. Disconnect connector.
3. Pull out the lens.
4. Remove the bulb by pulling it out.
5. Install the new bulb by pushing it in.
6. Reinstall the lens.
7. Reconnect connector.
HARNESS
Harness Inspection
Check trailer harness and connector for damages.
Repair or replace as required.
Wiring and Connector Identification
When making wiring or connector repairs, follow
the diagram below to identify the appropriate and
necessary connections.
rmo2010-005-025_a
A – 1
B – 2
C – 3
D – 4
E – 5
F – 6
G – 7
H, J and 8: empty
Tongue Harness Removal
1. Remove tongue. See
TONGUE REMOVAL
in
FRAME
subsection.
2. Remove coupler. See COUPLER REMOVAL in
FRAME subsection.
3. Pull harness out of location.
rmr2010-068-007_a
1. Tongue
2. Coupler
3. Harness
4. Rubber support
rmr2010-068
39