Subsection XX (DIGITALLY ENCODED SECURITY SYSTEM (D.E.S.S.))
KEY
KEY TYPE
BLACK key
Performance key
GRAY key
Normal key
8. Click on the appropriate
Add Key
button.
tbl2011-001-053_d
1. Add Performance Key button
2. Add Normal Key button
NOTE:
The
Add Work Key
button is not used for
these vehicles.
9. Turn ignition switch to OFF.
10. Remove the key.
11. Insert the next key to be programmed.
12. Turn ignition key to ON position.
13. Click on the appropriate
Add Key
button.
14. Repeat to program more keys if needed.
15. Click on
Write Data
button to transfer new
settings and information to the ECM.
vmr2006-012-100_ben
WRITE DATA BUTTON
When new data is written in the ECM, a message
that says “Remove key from vehicle” is displayed
in the gauge. When this occurs, remove the key
from ignition switch and wait until the message
disappears.
16. Click on EXIT button to end session.
17. Disconnect all cables and hardware from vehi-
cle.
18. Ensure to reinstall the connector into its hous-
ing.
2
vmr2013-034
