Can-Am 2008 Outlander 400 EFI, Руководство по ремонту, Страница: 495 / 599

FLUIDS
LOCATION MINIMUM OCTANE NUMBER
North America 87 (RON + MON) / 2
Elsewhere 92 RON
WARNING
Always stop engine before refueling. Open
cap slowly. If a differential pressure condi-
tion is noticed (whistling sound heard when
loosening fuel tank cap) have vehicle inspect-
ed and/or repaired before further operation.
Fuel is flammable and explosive under cer-
tain conditions. Never use an open flame
to check fuel level. Never smoke or allow
flame or spark in vicinity. Always work in a
well-ventilated area. Never top up the fu-
el tank before placing the vehicle in a warm
area. As temperature increases, fuel expands
and may overflow. Always wipe off any fuel
or oil spillage from the vehicle.
NOTICE Never place anything over fuel tank
cap as this could block the vent hole, leading to
engine misfire.
NOTICE Never experiment with other fuels.
The use of non-recommended fuels can re-
sult in vehicle performance deterioration and
damage to critical parts in the fuel system and
engine components.
NOTICE Never mix oil with fuel, these vehicles
are equipped with a 4-stroke engine.
Engine Oil
NOTICE Do not overfill. Operating the engine
with an improper oil level may severely dam-
age engine. Wipe off any oil spillage.
Recommended Engine Oil
Use a 5W 30 4-stroke engine oil that meets or
exceeds the requirements for API service clas-
sification SM, SL or SJ. Refer to label on the oil
container.
The XP-S 5W 30 4-stroke oil (P/N 219 700 706) is
recommended for all seasons.
For improved overall performance and all season
application, use XP-S 5W40 synthetic oil (P/N 293
600 039).
NOTE:
For Outlander 400 series, the same oil lubri-
cates both engine and transmission.
NOTE:
Other viscosity should be used if the av-
erage temperature is outside the range of the
recommended oil. Refer to the following table.
XP-S 5W40 Synthetic Oil (P/N 293 600 039)
XP-S 5W30 Mineral Oil (P/N 219 700 706)
XP-S 10W40 Mineral Oil (P/N 219 700 346)
Temperature Range
50°C (122°F)
40°C (104°F)
30°C (86°F)
20°C (68°F)
10°C (50°F)
0°C (32°F)
- 10°C (14°F)
- 20°C (- 4°F)
- 30°C (- 22°F)
Engine Oil Level Verification
1. Ensure that engine is cold and not running.
2. Park vehicle straight on a level surface.
3. Unscrew and remove oil dipstick.
vmo2008-019-015_a
TYPICAL - RH SIDE OF ENGINE
1. Oil Dipstick
4. Wipe dipstick.
5. Reinstall and screw in the dipstick completely.
6. Unscrew and remove the dipstick.
7. Check oil level as per the following illustration.
PREDELIVERY 2009-2 13 / 34
sales@midwestmanuals.com
sales@midwestmanuals.com