Can-Am 2008 Outlander 400 EFI, Руководство по ремонту, Страница: 494 / 599

FLUIDS
vsi2008-018-010_b
1. M6 x 20 bolt
2. M6 nut
21. Reposition brake lever (s) as previously set
then tighten bolt.
WARNING
Make sure brake lever (s) is properly secured
in place and will not rotate by pushing it
downward and upward.
WARNING
Make sure that there is clearance at all time
between the deflectors and the brake lever (s)
and all other moving components.
Central Skid Plate
X Models
1. Put skid plate in place.
vsi2008-020-007_b
A. Front of vehicle
B. Rear of vehicle
1. Front holes
2. Middle holes
3. Rear holes
2. Place skid plate bracket on vehicle frame.
3. Align skid plate front holes with skid plate
bracket holes.
4. Assemble skid plate using front M8 retaining
bolts and M8 nuts.
5. Do not tighten front bolts for the moment.
6. Align M8 U-nuts with skid plate middle holes.
7. Insert M8 U-nuts on vehicle frame.
8. Assemble skid plate using middle M8 retaining
bolts, M8 flat washers and M8 U-nuts.
9. Do not tighten middle bolts for the moment.
10. Align M8 U-nuts with skid plate rear holes.
11. Insert M8 U-nuts on vehicle frame.
12. Assemble skid plate using rear M8 retaining
bolts, M8 flat washers and M8 U-nuts.
NOTE:
Washers must be installed between retain-
ing bolts and skid plate.
13. Torque all M8 retaining bolts to 11 N•m
(97 lbf• in ).
vbl2008-005-500_b
A. Front of vehicle
B. Rear of vehicle
1. Skid plate
2. Skid plate bracket
3. M8 retaining bolt
4. M8 flat washer
FLUIDS
General Guidelines
All fluids (except fuel) have already been filled at
factory, it is only necessary to validate them. How-
ever, if refill is needed, refer to the appropriate
ATV
SHOP MANUAL for the proper procedure.
Fuel
1. Add a small amount of fuel in the fuel reservoir.
Recommended Fuel
Use regular unleaded gasoline or gasohol contain-
ing less than 10% of ethanol or methanol, available
from most service stations.
Refer to the following table for recommended
minimum octane number:
12 / 34 2009-2 PREDELIVERY
sales@midwestmanuals.com
sales@midwestmanuals.com