CAMSO 30D23MC, Руководство по обслуживанию

Страница: 31 / 106

3 - Midroller Wheel Seal And Bearing Removal And Installation
29
STEP 8
Remove the locking washer (1).
STEP 9
Use the hub (1) to push the outer bearing cone (2)
from the axle.
NOTE: On models before TRE0216003 the bearing
is a press fit and will require a puller to remove the
hub (1) and bearing (2).
NOTE: On press fit bearings, if there is damage to
the bearing and axle it can be upgraded to a slip fit
bearings by replacing the hub bearings and axle from
Camso Service Parts.
STEP 10
If the inner bearing cone (1) did not come off with the
hub remove the inner bearing cone (1).
NOTE: On models before TRE0216003 the bearing
is press fit and will require a bearing splitter / puller to
remove the bearing.
STEP 11
Remove the seals (1) and load rings.
cp0496
1
cp0497
2
1
cp0499
1
cp0500
1