Camplux CA686M-LP Скачать руководство пользователя

Страница: 44 / 84

Leak testing

WARNING:

Never use an open flame to test for gas leaks, as property

damage, personal injury, or death could result.
The water heater and its gas connections must be leak tested at normal operating

pressures before it is placed in operation.

● Turn on the gas shut-off valve(s) to the water heater.

● Use a commercial leak detector or soapy water solution to test for leaks at all

connections and fittings. Bubbles indicate a gas leak that must be corrected.
All connections should also be leak tested after the water heater is placed in

operation.

Pressure testing the gas supply system

WARNING: Install a gas pressure regulator, in the gas supply line,

which does not exceed the maximum supply pressure. DO NOT use an

industrial type gas regulator.

The water heater must be isolated from the gas piping system by closing the

manual gas shut-off valve during any pressure testing of the gas supply piping at

pressures equal to or less than 1/2 psi (14’w.c.).

High altitude

Ratings of gas appliances are based on sea level operation and need not be

changed for installations at elevations up to 2,000 feet. Unit not recommended for

elevations in excess of 2,000 feet.

Installing the CA686M tankless water heater

DANGER:

Failure to install the vent adapter and properly vent the water

heater to the outdoors as outlined in the Venting section of this manual will result

in unsafe operation of the water heater causing death, serious injury, explosion, or

fire. To avoid the risk of fire, explosion,or asphyxiation from carbon monoxide,

NEVER operate the water heater unless it is properly vented and has adequate

air supply for proper operation as outlined in the Venting section of this manual.

WARNING:

Use UL approved Category III Stainless Steel vent material only.

No other vent material is permitted.

Owner must refer to vent manufacturer’s instructions and specifications. Z-Flex

information can be found at www.novaflex.com, see page 48 for additional links.

Visit Us: Camplux.com

[email protected]

3330-A Marathon Ct Charleston, SC 29418

1(844) 538-7475

Содержание CA686M-LP





















































































Результаты поиска

Содержание CA686M-LP

Отзывы:

Похожие инструкции для CA686M-LP

Бренды по названию

Популярные бренды

Camplux CA686M-LP, Инструкция по использованию и уходу

Результаты поиска

Содержание CA686M-LP

Отзывы:

Похожие инструкции для CA686M-LP

Бренды по названию

Популярные бренды