Remote Control
Aviation Joint
Aviation Joint
2. For two controls: First, cut off the aviation joints on the two controllers, plug one
into the socket on the water heater (length is dependent on your requirements),
and throw away the other. Then connect the wires of the aviation joint to the
inlet wire of the connector, and connect the two remote control to the outlet
wires of connector.
Installation of remote control
1. Remove the front cover of the Remote Control. (See illustration below)
2. At installation site, mark and screw four holes with 0.24” with 1.2” depth. Insert
4 rubber screws into the holes. Place the remote control against the wall, align
the holes of control with the holes in the wall, and fasten them with wood thread
screws. (See illustration below)
Remote Control
Front Cover
Installation Hole
Installation Hole
1
24
Visit Us: Camplux.com
3330-A Marathon Ct Charleston, SC 29418
1(844) 538-7475
Содержание CA686M-LP
Страница 2: ......
Страница 83: ......
Страница 84: ...Visit Us Camplux com support camplux com 3330 A Marathon Ct Charleston SC 29418 1 844 538 7475 ...