Camplux CA686M-LP Скачать руководство пользователя

Страница: 32 / 84

To ensure proper operation of the water heater, the following water pressure

guidelines should be followed:

●

Operation of the water heater requires the minimum water pressure of 14 psi

and a minimum water flow rate of 0.75 gpm.

●

Additional water pressure is required for long pipe runs and outlet fitting(s)

water pressure drops.

● To maintain proper performance, ensure suffi Required Water Pressure = Min.

Operating Water Pressure (14 psi) + Pipe Pressure Loss + Faucet and Shower

Pressure Loss + Safety Margin (more than 5 psi).

● To supply hot water to upper floors, additional water pressure (0.44 psi/ft) must

be ensured.The measurement should be calculated by the distance between

the water inlet of the water heater (ground level) to the hot water faucet (upper

floor level).

● Well water systems should be set at a range of 50-60 psi.

● When the water is supplied from a water supply tank, the height of the tank

and the diameter of the pipes and their relation to water pressure, should be

taken into consideration. Gravity water pressure is not recommended.

NOTICE:

If the water flow resistance of a shower head is too high, the burner in

the water heater will fail to ignite. Keep the shower head clean from debris that

could cause additional pressure drop.

NOTICE:

If using mixing valves on the outlet, choose one which prevents cold

water pressure from overcoming hot water line pressure.

IMPORTANT:

Do not apply heat to the HOT or COLD water connections. Any

heat appliedtothe water supply fittings will permanently damage the internal

components of the water heater.

CAUTION: This water heater must only be used with the following water

supply system conditions:

● With clean, potable water free of corrosive chemicals, sand, dirt, or other

contaminates.

● With inlet water temperatures above 32°F, but not exceeding 120°F.

● Free of lime and scale deposits.

● DO NOT reverse the hot and cold water connections. The water heater

will not operate.

Visit Us: Camplux.com

[email protected]

3330-A Marathon Ct Charleston, SC 29418

1(844) 538-7475

Содержание CA686M-LP





















































































Результаты поиска

Содержание CA686M-LP

Отзывы:

Похожие инструкции для CA686M-LP

Бренды по названию

Популярные бренды

Camplux CA686M-LP, Инструкция по использованию и уходу

Результаты поиска

Содержание CA686M-LP

Отзывы:

Похожие инструкции для CA686M-LP

Бренды по названию

Популярные бренды