Camplux CA686M-LP Скачать руководство пользователя

Страница: 16 / 84

This unit is of high power and will consume a lot of oxygen when working, so the

installation area must be well ventilated, and air in and out of the area has no

blockage.
The outdoor unit should not be installed in a corridor with rooms on the both sides

or in the closed corridor.
Take measures to avoid direct wind, rain and snow. The installation area should be

constructed of fire retardant materials. The power socket connecting the water

heater should be properly grounded.
The water heater must be located so it is not subject to physical damage, for

example, by moving vehicles, area flooding, etc.
The water heater must be installed vertically with the water, gas, and power

connections on the underside, pointing toward the ground.
Failure to properly install the water heater outdoors as outlined in this manual can

result in unsafe operation.
Hot and cold water lines should be insulated to conserve water and energy.
DO NOT install water heater where subject to vibrations.
DO NOT install the water heater in Recreational Vehicles, Mobile Homes, Boats

and other Watercraft.
DO NOT install the water heater near vents for heating or cooling. A minimum of 4

feet should be maintained.
If the clearances stated on the Instruction/Warning Label, located on the front

panel of the heater differ, install the water heater according to the clearances

stated on the label.

WARNING:

Combustible construction refers to adjacent walls and ceilings

and should not be confused with combustible or flammable products and

materials. Combustible and/or flammable products and materials should never be

stored in the vicinity of this or any gas appliances.
Proper operation of the water heater requires air for combustion and ventilation.

Provisions for combustion and ventilation air must comply with referenced codes

and standards.

Combustion and ventilation air

This water heater is for WA686M installation ONLY.
It must NOT be installed indoors or in a confined space.

Visit Us: Camplux.com

[email protected]

3330-A Marathon Ct Charleston, SC 29418

1(844) 538-7475

Содержание CA686M-LP





















































































Результаты поиска

Содержание CA686M-LP

Отзывы:

Похожие инструкции для CA686M-LP

Бренды по названию

Популярные бренды

Camplux CA686M-LP, Инструкция по использованию и уходу

Результаты поиска

Содержание CA686M-LP

Отзывы:

Похожие инструкции для CA686M-LP

Бренды по названию

Популярные бренды