Campbell CR9000, Инструкция по эксплуатации

Страница: 39 / 218

Section 2. Data Storage and Retrieval
2-7
file will be named MAIN01.DAT and so on. It takes a little time to open
the file so be sure it is opened in advance of the event you want to store.
The file is written to every 1 second so it is important the table size be large
enough to store sufficient data between writes. During each write
operation, the data may not be updated on the screen but this will not effect
the stored data.
2.3.3 Logger Files Retrieve
Logger Files under the PC9000 tools menu allows the user to check the
programs stored in CPU Flash memory and the files stored on the PCMCIA
cards. Any of the files shown in logger files can be copied to the computer
by highlighting the file and pressing the retrieve button. Data files in the
CR9000 CPU and Flash memory are not shown.
The retrieved data file is stored on the computer in the same form that it
was stored on the PC card (TOB2). This format generally needs to be
converted to another format for analysis (Section 2.3.4)
FIGURE 2.3-2. Logger Files Dialog Box