CAMERA LINK Q-2A340, Руководство по эксплуатации и инструкция пользователя

Страница: 27 / 66

OPERATING AND USER MANUAL QUARTZ SERIES
28
Post Processing and Output commands
SYNTAX DESCRIPTION DEFAULT VALUE
CLC2
(66 MHZ) CLC3
(85 MHZ)
BL Set the black level (monochrome only) 20 20
BL? Get the black level (monochrome only)
CLC Set pixelclock speed 2 3
CLC? Get pixelclock speed
OFS Set output offset (color only) 20 20
OFS? Set output offset (color only)
FCR Reset frame counter
FVALGAP Set gap time between two consecutive frames 12 12
FVALGAP? Get gap time between two consecutive frames
GA Set the digital fine gain 100 100
GA? Get the current digital fine gain
WB Set white balance gain (color only) 100;100;100 100;100;100
WB? Get the current white balance gain (color only)
MI Set the image output to mirrored 0 0
MI? Get the current mirror state
OR Set the camera output resolution 10 10
OR? Get the current camera output resolution
ROI Set the Region of Interest [Full res] [Full res]
ROI? Get the Region of Interest
TPLVL Set uniform test pattern video level 511 511
TPLVL? Get uniform test pattern video level
OLUTBGN Prepares the camera to receive entries for the output LUT
OLUT Provides one entry for the output LUT
OLUT? Retrieve one entry from the output LUT
OLUTEND Finalize the output LUT filling operation
OLUTE Enable/disable the output LUT 0 0
OLUTE? Get the enable status of the output LUT
OFRM Set the output format 2;8 2;8
OFRM? Get the output format
OVL Set image overlay 0 0
OVL? Get image overlay
TP Set test pattern 0 0
TP? Get test pattern
TTF Set ten tap output format 2 2
TTF? Get ten tap output format
HBIN Set horizontal binning (values 1, 2 or 4) 1 1
HBIN? Get horizontal binning
VBIN Set vertical binning (values 1, 2 or 4) 1 1
VBIN? Get horizontal binning
AVG Set averaging mode (values 1-6) 1 1
AVG? Get averaging mode