CAMERA LINK Q-2A340, Руководство по эксплуатации и инструкция пользователя

Страница: 61 / 66

OPERATING AND USER MANUAL QUARTZ SERIES
62
necessary to obtain the error result after each command. However to increase the reliability of the
whole system ( host system), it is good practice to check each command by obtaining the
error result or use a query command to obtain the value of the last setting performed and check
whether the setting is actually done.
Camera temperature 10.1.3.
The camera is equipped with a temperature sensor on a PCB in the sensor.
The temperature measured can be read.
Command format: TM?
Return Message: x
Where x = the temperature in °C.
Valid range : 0 … +90 = 0 … 90°C; resolution: 1°C
Diagnostics 10.2
Test patter n 10.2.1.
The camera can generate a test pattern in the mode the camera is currently working. The camera will
continue working in the selected mode, but instead of the usual image, an artificial image is displayed.
The test pattern is built in for service and calibration purposes.
NOTE: This image is inserted in front of the digital gain stage. It represents full bitdepth when the gain
command is set to 100, e.g. 1 time gain (GA? returns 100).
Command format: TPx
Command format: TP?
Return Message: x
Where x indicates the state of operation;
X TEST PATTERN FUNCTION
0 Normal operation (No test pattern)
1 Test pattern is displayed (see figure 6.2)
2 Displays white cross hairs in normal image
3 Grey image, grey value to be set with command TPLVL.
This test pattern can e.g. be used to visualize flat field
corrections (command FFP).
Depending on the chosen camera resolution the test pattern is 8 or 10 bit.
NOTE: that the test pattern is amplified with the gain GA.
NOTE: it is not possible to perform vertical mirror on the test pattern.