CAMERA LINK Q-2A340, Руководство по эксплуатации и инструкция пользователя

Страница: 40 / 66

OPERATING AND USER MANUAL QUARTZ SERIES
41
Calibrations, processing and 8.
corrections
Defect pixel correction commands 8.1
Introduction 8.1.1.
In Quartz series cameras defect pixels are corrected in real time.
Adimec does not release cameras with more than 1 adjecent defect pixel upon delivery. However,
additional defect pixes can be user-programmed.
Up to 2 adjacent pixels can be corrected. More than 2 adjacent defect pixels can be user
programmed, but may not result in a reliable correction.
Correction is done by interpolation of the adjacent pixels according to the methode illustrated in
figures 8.1 and 8.2
Defect pixel correction method on monochrome cameras. Figure 8.1:
Defect pixel correction method on color cameras. Figure 8.2:
Defect pixel correction 8.1.2.
The pixel correction can be enabled or disabled by means of the DPE command.
Command format: DPEx
Command format: DPE?
Return Message: x
Where x is set to 0 to disable the pixel correction and x is set to 1 to enable the pixel correction.
D
0 ½ ½
D
0 1 0
D
0 1
D
0
D
D
0 ½ ½ 0 0
x x D
0 1 0 0
x x D
0
D
0 1 0 0
x x D
0