CAMERA LINK Q-2A340, Руководство по эксплуатации и инструкция пользователя

Страница: 23 / 66

OPERATING AND USER MANUAL QUARTZ SERIES
24
Camera identification string
The camera identification string is stored in the camera and can be read with the ID? command.
Command format: ID?
Return Message:“Q-2A340x/CL S/N:yyyyyy
or: “Q-4A150x/CL S/N:yyyyyy
or: “Q-4A180x/CL S/N:yyyyyy
or: “Q-12A65x/CL S/N:yyyyyy
where x indicate the type
CAMERA TYPE X
Monochrome m
Color c
and yyyyyy is the serial number of the camera.
Serial number of the camera
Each camera has a unique serial number. It is stored in the camera and can be read with the SN?
command.
Command format: SN?
Return Message: ”yyyyyy
where yyyyyy is the serial number of the camera.
Camera settings and user data commands 6.3.2.
Load factory defaults
At delivery, the factory settings are stored as the power-up default settings. The user may however
change the power-up settings without losing the factory default settings. A copy of the factory default
settings is stored in the camera. The camera settings are set to the copy of the factory defaults by
means of the FD command (Factory Defaults).
Command format: FD
After restoring the factory settings (FD), the settings may be saved again as the power-up defaults by
executing the SC.
Save camera settings
Camera settings are directly set by the individual commands for these settings. When the settings
performed are satisfactory, they may be used as the settings to be used by the camera after power-up.
The settings are saved as power-up defaults using the SC command (Save Configuration).
Command format: SC
Load camera settings
The camera power-up settings are restored after power-up but can also be restored during camera
operation with the LC command (Load Configuration)
Command format: LC