OPERATING AND USER MANUAL QUARTZ SERIES
25
User storage
16 signed integers and 16 character strings can be stored in the camera for user purposes. These
values do not influence camera operation.
Command format: USIx;y
Command format: USI?x
Return Message: y
where x = 0 … 15, stores / reads back the xth user signed integer, being y.
Command format: USSx;y
Command format: USS?x
Return Message: ”y
where x = 0 … 15, stores / reads back the xth user string, being y.
A user string always consists of 32 characters maximum. If a string longer than 32 characters is set,
only the first 32 characters will be programmed.
Camera command set overview
6.4
Identification commands
SYNTAX
DESCRIPTION
BS?
Get the build state of the camera
ID?
Get the camera indentification serial number
SN?
Get the serial number of the camera
Camera Status commands
SYNTAX
DESCRIPTION
BIT?
Get the built-in self test status code
ERR?
Get the last error result
TM?
Get temperature
In the tables below, the distinction is made between 2 Camera Link clock frequencies 66MHz and
85MHz. This frequency is controllable with the CLC command (see section 9.5.4).
Содержание Q-2A340
