1
C1
7
2
TS
2
1
Page
9
- Manual
FA00993-EN
- 12/2018 - © C
AME S.p.A. -
Tr
anslation of the original instructions
Mode 1
(default):
2-7 (NO) OPEN-CLOSE and 2-1 (NC) STOP.
Mode 2
: 2-7 (NO) OPEN and 2-1 (NO) CLOSE (recommended for multiple commands).
Operating mode change
Switch on the board pressing and holding down the programming button for 10 seconds:
- from mode 1 to mode 2, the red LED flashes twice;
- from mode 2 to mode 1, the red LED flashes once.
☞
Each time the board is switched on, if it is in mode 1, the red LED remains off, if it is in mode 2, the red
LED flashes twice.
Operating modes
Mode 1 (default): OPEN-CLOSE function (NO
contact)
from control device.
Mode 2: OPEN function (NO contact)
from
control device.
Mode 1 (default): STOP button (NC contact).
Parking saver barrier stop button.
Mode 2: CLOSE function (NO contact)
from
control device.
Command and control devices
if
not
used
