a
b
Page
12
- Manual
FA00993-EN
- 12/2018 - © C
AME S.p.A. -
Tr
anslation of the original instructions
MANAGING USERS BY AN ASSOCIATED RADIO CONTROL
Preliminary operations
Check that the RG58 cable of the antenna is connected to the appropriate terminals, and that
the
AF board
is inserted on the electronic board connector.
Before fitting the AF board, you MUST CUT OFF THE MAIN POWER SUPPLY and, remove any emergency
batteries.
Adding a user
If one or more LM22N boards are connected to the control panel,
it is not possible to store the same
radio code on all the boards.
Set DIP-switch 4 to OFF.
You can enter up to 50 users.
Keep pressed the PROG
a
programming button on the control board. The programming LED
b
flashes.
Press any key on the transmitter you want to memorize. The LED stays on to indicate that the saving is
complete.
