Cambium PTP 450, Конфигурация и руководство пользователя

Страница: 78 / 259

Task 4: Configuring General and Unit settings PTP 450 Configuration and User
pmp-0815 (August 2015) 3-21
Procedure 8 Special Headers for configuration file
1
A "configFileParameters" section can be added to the header to control the
behaviour of the device when importing configuration.
{
"cfgFileString": "Canopy configuration file",
"cfgFileVersion": "1.0",
"configFileParameters": {
"setToDefaults":true,
"rebootIfRequired":true,
}
}
The "
setToDefaults
" when set to "true" tell the device to reset to factory default
configuration and apply the configuration in the file on top of that. So any
attribute not in the configuration file will be set to its factory default value. By
default, the configuration in the file is merged with the existing configuration on
the device.
The "r
ebootIfRequired " flag when set to "true" tell the device to reboot
automatically if needed to apply the configuration change. By default, the device
will not reboot automatically.
Table 15 BHM Unit Settings attributes
Attribute Meaning
Set to Factory
Defaults Upon
Default Plug
Detection
If Enabled is checked, then an override/default plug functions
as a default plug. When the module is rebooted with the plug
inserted, it can be accessed at the IP address 169.254.1.1 and
no password, and all parameter values are reset to defaults.
A subscriber, technician, or other person who gains physical
access to the module and uses an override/default plug
cannot
see or learn the settings that were previously configured in it.
When the module is later rebooted with no plug inserted, the
module uses the new values for any parameters that were
changed and the default values for any that were not.
If
Disabled
is checked, then an override (default) plug
functions as an override plug. When the module is rebooted
with the plug inserted, it can be accessed at the IP address
169.254.1.1 and no password, and all previously configured
parameter values remain and are displayed. A subscriber,
technician, or other person who gains physical access to the
module and uses an override/default plug
can see and learn the
settings. When the module is later rebooted with no plug
inserted, the module uses the new values for any parameters
that were changed and the previous values for any that were
not.