Notifications
PTP 450 Configuration and User
pmp-0815 (August 2015)
6-45
European Union Notification for 5.4 and 5.8 GHz Product
The 5.4 and 5.8 GHz connectorized product is a two-way radio transceiver suitable for
use in Broadband Wireless Access System (WAS), Radio Local Area Network (RLAN), or
Fixed Wireless Access (FWA) systems. It is a Class 2 device and uses operating
frequencies that are not harmonized throughout the EU member states. The operator is
responsible for obtaining any national licenses required to operate this product and
these must be obtained before using the product in any particular country.
Hereby, Cambium declares that the 5.4 and 5.8 GHz product complies with the essential
requirements and other relevant provisions of Directive 1999/5/EC. The relevant
Declaration of Conformity can be found at
http://www.cambiumnetworks.com/support/ec-doc
This equipment is marked
to show compliance with the European
R&TTE directive 1999/5/EC.
Regulatory Requirements for CEPT Member States (www.cept.org)
When operated in accordance with the instructions for use, Cambium Wireless
equipment operating in the 5.4 GHz bands is compliant with CEPT Recommendation 70-
03 Annex 3 for Wideband Data Transmission and HIPERLANs. For compliant operation
in the 5.4 GHz band, the transmit power (EIRP) from the integrated antenna or a
connectorized antenna shall be no more than 0.5 W (27 dBm).
For EU member states, RLAN equipment in the 5.4GHz bands is exempt from individual
licensing under Commission Recommendation 2003/203/EC. Contact the appropriate
national administrations for details on the conditions of use for the bands in question
and any exceptions that might apply. Also see www.ero.dk for further information.
10 MHz channels are used, centered on 5475 to 5595 and 5655 to 5715 in 5 MHz
increments. This is within the 5470 to 5725 MHz U-NII band with 5600 to 5650 MHz
excluded.
Cambium Radio equipment operating in the 5470 to 5725 MHz band are categorized as
“Class 1” devices within the EU in accordance with ECC DEC(04)08 and are “CE”
marked
to show compliance with the European Radio &
Telecommunications Terminal Equipment (R&TTE) directive 1999/5/EC. The relevant
Declaration of Conformity can be found at
http://www.cambiumnetworks.com/support/ec_doc/
A European Commission decision, implemented by Member States on 31 October 2005,
makes the frequency band 5470-5725 MHz available in all EU Member States for
wireless access systems. Under this decision, the designation of Canopy 5.4GHz
products become “Class 1 devices” and these do not require notification under article 6,
section 4 of the R&TTE Directive. Consequently, these 5.4GHz products are only marked
with the
symbol and may be used in any member state.
