Calspas F1239, Руководство пользователя

Страница: 18 / 64

2013 Portable Spa
LTR20131000, Rev. E
Operating
Your Spa
www.calspas.com
16
Circulation Pump
This is an optional feature. If you have the optional
circulation pump, it will come on when the system
is checking temperature, during filter cycles, during
freeze conditions, or when another pump is on.
When the circulation pump is installed, pump 1 is
one-speed only. Otherwise, pump 1 is two-speed,
with the low speed performing filtration. (See page
8 for control box settings.)
Light
Press the Light button to turn on
the light. Press it once again to turn
the light off. All optional lighting such
as the control panel light and cabinet perimeter
lighting is controlled by the Light button and will
turn on and off with the spa light.
Automatic Time outs
These features will automatically turn themselves
off during periods of continuous use:
Low speed pump After 4 hours •
High speed pumps After 15 minutes •
Optional circulation pump After 15 minutes •
Optional turbo After 15 minutes •
Spa light After 4 hours •
Setting Filtration Cycles
Your spa is programmed to filter twice a day. The
first cycle will begin six minutes after the spa is
turned on and the second cycle 12 hours later.
The factory has programmed the cycle to last for
two hours but this can be reset according on your
requirements.
To set the time of day filtration begins, turn off the
power to the spa at the time you would like one
of the filtration cycles to begin, then turn back on
after 30 seconds.
To set the length of filtration cycles:
Press the • Temp
button or the Warm/
Cool button. The
temperature setting
will flash.
Press the • Jets button. The filter
cycle duration will appear.
F2 Two hours
F4 Four hours
F6 Six hours
F8 Eight hours
FC Continuous filtration
Press • Temp or Warm/Cool button to change
the filtering cycle duration.
Press the • Jets button to exit.
If you have an ozonator, it will activate during the
filtration cycles.