Calspas F1239, Руководство пользователя

Страница: 16 / 64

2013 Portable Spa
LTR20131000, Rev. E
Operating
Your Spa
www.calspas.com
14
Jet Operation: VS300, VS513Z, and 5100 (single voltage) systems
One Pump Systems
Single pump systems operate on high power
only.
To operate the jets, press the
JETS button:
Once to turn the pump ON. •
Twice to turn the pump OFF. •
Jet Operation: Two and Three Pump
Systems
Two and three pump systems can be configured to
operate on low or high power. The factory default is low
power. This section describes how the spa operates
when it is configured for low power operation.
See page 8 for GFCI and wiring requirements for both
low and high power operation and for switch settings
for high power configuration.
Spas configured for low power operation require
approximately 20% less power to operate. With low
power configuration, the spa will never use more
than 30 amps while in operation and will alternate
between 110V and 220V, while spas configured for
high power will operate continuously at 220V.
When only one pump is running, the heater will
operate at 220V. When two or three pumps are
running, the heater will automatically switch to
operate at 110V.
The heater light will tell you when it is operating
and what voltage it is using. See the “Heater
Light” section above.
For spas configured for high power operation, the
heater will turn on when (1) the water temperature
drops or (2) the jets are in use.
Operating the jets
Press the JETS or JETS 1 button:
Once to turn pump 1 ON. •
Twice to turn pump 1 OFF. •
Press the OPTION or JETS 2 button:
Once to turn pump 2 ON. •
Twice to turn pump 3 ON. •
Three times to turn pump 2 OFF. •
Four times to turn pump 2 OFF. •
One Pump Systems
Single pump systems operate on high power
only.
To operate the jets, press the
JETS button:
Once to turn the pump ON. •
Twice to turn the pump OFF. •
Two and Three pump Systems
Press the OPTION or JETS 2 button:
Once to turn pump 2 ON. •
Twice to turn pump 3 ON. •
Three times to turn pump 2 OFF. •
Four times to turn pump 2 OFF. •
Jet Operation: 5100 (dual voltage) system ONLY