Calspas F1239, Руководство пользователя

Страница: 25 / 64

2013 Portable Spa
LTR20131000, Rev. E
Operating
Your Spa
www.calspas.com
23
The Main Screen
When the spa has finished priming,
you will see the Main Screen. Important
information about spa operation can
be seen quickly from the Main Screen.
The most important features can be
accessed from this screen.
The actual water temperature •
can be seen in large text and the
desired, or Set Temperature, can
be selected and adjusted.
Time-of-day, ozone operation and
•
filter operation status are shown,
along with other messages and
alerts.
Temperature Range (High or Low) is indicated in
•
the upper right corner.
A Lock icon is visible if the panel or settings are
•
locked.
Navigation
There are four selections you can make on the Main
Screen:
Set temperature - Press the left arrow button to
change the Set Temperature number to white. The
Set Temperature can then be adjusted with the up and
down buttons. Pressing the Select button or the Right
Arrow button will save the new set temperature.
Menu selections - The three menu choices on the
right, Spa , Shortcuts , and Settings , can be selected
and the screen will change to show more detailed
controls or programming functions. They will be
discussed further in this section.
Messages
At the bottom of the screen, messages may appear
at various times. Some of these messages must be
dismissed by the user (see page 17).
Set: 104°F
8:32 PM
Ozone
Filter 1
Spa
Shortcuts
Settings
High Range
102°F
Ready in Rest Mode
Heating
Water Temperature
Messages
Desired Temperature
Temperature Range
Left, Right, Up, Down
and Select Buttons
Pump and Heat
Menus Lock Indicator
Status
Spa Screen
The Spa Screen shows all available
equipment to control, as well as
other features, like Invert, in one
easy-to-navigate screen. The
display shows icons that are related
to the equipment installed on a
particular spa model, so this screen
may change depending on the
installation.
The navigation buttons are used
to select an individual device. The
device that is chosen is highlighted with a white
outline and the text under the icon changes to white.
Once a device is selected, it can be controlled using
the center Select Button.
Some devices, like pumps, may have more than one
ON state, so the icon will change to reflect the state
that the equipment is in. Below are some examples
of 2-speed Pump indicators.
If the Spa has a Circ Pump, a Circ Pump Icon will
appear to indicate its activity, but outside of Priming
Mode, the Circ Pump cannot be controlled directly.
NOTE: The icon for the pump that is associated with
the heater (Circ or P1 Low) will have a red glow in the
center when the heater is running.
Ready in Rest Mode
Heating
Back Jets 1 Jets 2 Jets 3 Light
Invert
Ready in Rest Mode
Heating
Shortcuts
Jets 3
Jets 2
Jets 1
Light Back