Calspas F1239 страница 32 Скачать руководство пользователя

Страница: 32 / 64

2013 Portable Spa

LTR20131000, Rev. E

Operating

Your Spa

www.calspas.com

Wireless Spa Monitor

The wireless spa monitor allows you to monitor and change your spa’s activity

from a distance. The table below describes each button’s function.

Light

Operates spa light and LED mood lighting

Temp

Display or adjust the set temperature control

Jet 1

Turn on or off jet 1

Mode

Switch between Standard, Economy, and Sleep Modes

Pump On/Off

This button allows the user to turn on and off the

ATS seat pump. Press this button once to turn the

pump on. Once on, the green LED light on the control

panel will illuminate, indicating that the system is

operational. To turn off the pump, press the “PUMP

ON/OFF” button a second time. Note: The pump

must be on prior to operating any other features of

this system.

Pulse Mode

This button allows the user to turn the ATS massage

control on and off. Press the pulse button once to

turn on the massage control. Once pressed, the

orange LED in position number 1will light, indicating

the number one pulse mode. Each press of either the

up or down button will move the orange LED up or

down to the next pulse mode.
Note: Allow one second between each button press.

Pressing the button quickly may cause improper

operation. To turn the pulse mode off and return to

normal pump operation, press the “PULSE MODE”

button a second time.

This button allows the user to cycle up from one

through seven massage modes one at a time. Each

mode offers a different pulsating massage. Some

modes are faster than others, so just cycle through

them to find the massage you like best.

Down

This button allows the user to cycle down through all

seven massage modes, one at a time.

Time Reset

Mode

Pulse mode will

normally run for

15 minutes then

automatically shut

off. For another

15-minute session,

press the “PUMP

ON/OFF” button

and the “PULSE

MODE” button. A green LED will blink and the pump

will run on high-speed mode as part of a 15-minute

cool down period. After that, the pump will stop

automatically and the green LED light on the panel

will continue to blink for one minute then shut off

automatically. After the second 15-minute session,

the system will run through a cool down cycle for up

to two hours. In this cool down mode, the user will

only be able to operate the pump (by again pressing

the “PUMP ON/OFF” button). However, the massage

mode will remain off until the cool down mode is

completed.

Pulse Mode System

Pulse mode system will shut off for two hours unless

reset by the following procedure. During this time the

pump will run at a maximum speed.

In the off position, press the “PULSE MODE”

•

button once.

The green power light will flash to indicate

•

reset.

Adjustable Therapy System

Содержание F1239

































































Результаты поиска

Содержание F1239

Отзывы:

Похожие инструкции для F1239

Бренды по названию

Популярные бренды

Calspas F1239, Руководство пользователя

Результаты поиска

Содержание F1239

Отзывы:

Похожие инструкции для F1239

Бренды по названию

Популярные бренды