Calsense CS3000, Руководство пользователя, Страница: 34 / 85

CS3000 User’s Guide
32 Calsense
Assigning POCs to 2-Wire Decoders
POC decoders, like station decoders, need to be assigned to a POC. On systems with a bypass manifold,
this is also where the decoders are assigned to that bypass.
To edit the 2-wire POC Assignment Screen (Figure 22):
1. From Main Menu, navigate to Setup and select 2-Wire . The 2-Wire dialog displays.
2. Navigate to and select POC Assignment . POC Assignment menu displays.
3. Navigate to the desired POC Decoder by Serial Number and press SELECT .
4. Navigate to Is this POC Decoder in use? and use +/- to select Yes .
5. If this decoder is part of a Bypass Manifold, navigate to the setting and use +/- to select Yes .
Note:
A minimum of two and a maximum of three decoders can be used to build a bypass
manifold.
6. When finished, press BACK to save changes, and return to Main Menu.
Figure 22: 2-Wire POC Assignment Screen