CS3000 User’s Guide
Calsense
13
Sharing Data Between Controllers
The
FLOWSENSE
feature provides the ability to configure the controller to share a point of connection
with other controllers within a
FLOWSENSE
chain.
To configure
FLOWSENSE
(Figure 5):
1.
From the Main Menu, navigate to
Setup
and select
FLOWSENSE
. The
FLOWSENSE
screen
displays.
2.
Navigate to Is this controller in a
FLOWSENSE
chain? and use
+/-
to select
Yes
or
No
.
•
If
Yes
:
i.
Navigate to
FLOWSENSE
address and use
+/-
to change internal
communication address of controller. The controller with the internet-
connected device should be addressed “A”. The other controllers in the chain
can be addressed “B” through “L” in any order, but each must be unique.
ii.
Navigate to Number of controllers in the chain and use
+/-
to select number of
controllers.
Note:
This setting is only available for the controller addressed “A”.
iii.
Navigate to and select
Start Scan
to discover controllers in the chain.
3.
When finished, press
BACK
to save changes, and return to Main menu.
Figure 5: FLOWSENSE Screen
Содержание CS3000
Страница 1: ...CS3000 USER S GUIDE...
