![background image](http://html1.mh-extra.com/html/california-instruments/2253i/2253i_user-manual_3434511073.webp)
User Manual
2253i / 2253iX
AMETEK
California Instruments
73
ENTRY
DESCRIPTION
GWAddress
Gateway address setting. A
default gateway
is a node (a router) on a computer network
that serves as an access point to another
network.
This value can be changed by pressing the
SET key and entering a new value from the
keypad. Use the numeric data pad to enter
each field. To move between the four fields,
use the decimal point key on the keypad.
Any change to this value will NOT take effect
until after power on the unit has been cycled.
HostBits
Number of host bits as opposed to network
bits in network mask. A CIDR class C network
uses 24 network bits and 8 host bits. (Class A
= 24, Class B = 16).
This value can be changed by pressing the
SET key and entering a new value from the
keypad. Any change to this value will NOT
take effect until after power on the unit has
been cycled.
Port No
TCP remote port number. This value must be
set to
5025
(SCPI) to support the built in web
page.
This value can be changed by pressing the
SET key and entering a new value from the
keypad. Any change to this value will NOT
take effect until after power on the unit has
been cycled.
LAN Default
LAN default setting can be achieve by
selecting the Mac address screen and press
the set key followed by the Enter key. Press
the Enter key again to confirm. The IP address
is set to DHCP or AUTO IP.
Содержание 2253i
Страница 5: ...User Manual 2253i 2253iX AMETEK California Instruments 5 SAFETY SYMBOLS...
Страница 99: ...User Manual 2253i 2253iX AMETEK California Instruments 99 Figure 6 1 Internal adjustment locations...
Страница 118: ...User Manual 2253i 2253iX AMETEK California Instruments 118 Figure 9 4 Voltage Modulation Frequency characteristics...