California Instruments 2253i, Руководство пользователя

Страница: 42 / 157

User Manual 2253i / 2253iX
AMETEK California Instruments 42
3.7.4 Auxiliary I/O Connector – J18
A high density D style, 15-pin I/O connector is located on the rear panel. Table 3-6 shows connections
by pin number.
Pin Signal Description
1 ACOM Analog Common
2 RPVA Remote Programming Voltage all phases (Option -
RPV) or Ext Input phase A (Option –EXT) – Use
ACOM as return signal
3 RPF Remote Programming Frequency (Option –RPF) –
Use ACOM as return signal
4 /INH Remote Inhibit. (TTL input) – Use DCOM as return
signal
5 TRIG IN Trigger Input (TTL input) If external sync option
(–EXS) is installed, this input is reassigned as Ext
Sync. – Use DCOM as return signal
6 FSTB Function Strobe or Trigger Output (TTL output)
7 DFI Discrete Fault Indicator output. Isolated Open
Collector. Can be used to signal external devices
when a fault condition is detected. – Use DCOM as
return signal
8 DCOM Digital Common
9 EXTB External input for phase B (Option -EXT). – Use
ACOM as return signal
10 EXTC External input for phase C (Option -EXT). – Use
ACOM as return signal
11-15 Reserved Do not use.
Table 3-6: DB15 Auxiliary I/O Connector
3.7.5 BNC Connectors (-LKM / -LKS options) – J19/J20
BNC connectors. Functions are called out on rear panel decal. Table 3-7 shows connections for the
optional -LKM and -LKS clock and lock mode. This option is available on iX models. Refer to section
3.9 for more details.
BNC Ref. Description
CLOCK J19 Clock Option (TTL output on Master / TTL input on Auxiliary)
LOCK J20 Lock Option (TTL output on Master / TTL input on Auxiliary)
Table 3-7: BNC Connectors