Water Quality Maintenance
2006 Portable Spa Owner's Manual
Page 51
LTR20061000, Rev. A
Bromine Clear Water Plan
This plan and its chemical dosages are intended for Cal Spas chemicals only. Most chemical manufacturers use
different chemical formulas and strengths. Only Cal spas chemicals are specially formulated to provide
chemical balance at lower dosages. Always read and follow printed instructions on chemical bottles and
packages.
Day One (Monday)
1.
Test spa water using “Bromine Test Strips”.
2.
Based on the Test Strip readings:
•
Adjust total alkalinity first (acceptable range of 80-120 ppm)
•
Then adjust the pH if needed. (range is between 7.2 to 7.8)
•
Add “Bromine Tablet(s)” if needed. (Do not add more than 2)
•
The recommended level of bromine is 3-5 ppm.
3.
Add 2 oz of “Stain and Scale Defense”.
4.
Remove dirty filter from the spa and rinse off. Allow to dry.
5.
Place your extra clean filter cartridge back into the spa.
6.
Vacuum debris from the bottom of your spa with the “Spa Vacuum”.
Day Two (Wednesday)
1.
Test spa water using Bromine Test Strips.
2.
Based on the Test Strip reading: Adjust total alkalinity, then the pH if needed.
Day Three (Friday)
1.
Test spa water using Bromine Test Strips.
2.
Based on the Test Strip reading:
•
Adjust total alkalinity, then the pH if needed.
•
Add one Bromine Tablet (if needed).
3.
Add 2 oz of Oxidizer Shock to spa. Run Spa for 15 minutes with cover off.
4.
Replace cover.
Содержание 2006 Portable spas
Страница 1: ...LTR20061000 Rev A 10 28 2005 ...
Страница 93: ...Appendix 2006 Portable Spa Owner s Manual Page 89 LTR20061000 Rev A Cal Spas Chemicals ...
Страница 95: ......
