Cal Spas 2006 Portable spas, Руководство пользователя

Страница: 22 / 96

Operating Your Spa
Page 18 2006 Portable Spa Owner's Manual
LTR20061000, Rev. A
mode will heat the water to the set temperature while Sleep mode, indicated by a “SL” on the main display, will
also only activate the heater during the filtering cycles but will only heat the water to within 20°F (10°C) of the
set temperature. Like Economy mode, “SL” will display solid when temperature is not current and will
alternate with actual temperature when it is current.
NOTE: Displayed temperature will only be current after the pump has been running for at least 2 minutes.
Switching Modes
•
Press “Temp” button followed by the “Light” button.
•
Press the same sequence to switch to the next mode.
Jets
Press the “Jets” button:
•
Once to activate low speed pump.
•
Twice to activate high speed.
•
Three times to return to turn pump off.
Light
Press the “Light” button to turn on the light. Press it once again to turn the light off. All optional lighting such
as the control panel light and cabinet perimeter lighting is controlled by the “Light” button and will turn on and
off with the spa light.
Pump 2 (6100 controls only)
Press the “Option” button to turn on the Pump 2 on. Press it once again to turn off the Pump 2 off.
Automatic Time outs
These features will automatically turn themselves off during periods of continuous use:
•
Low speed pump After 4 hours
•
High speed pumps After 15 minutes
•
Optional circulation pump After 15 minutes
•
Optional turbo After 15 minutes
•
Spa light After 15 minutes