Cal Spas 2006 Portable spas, Руководство пользователя

Страница: 19 / 96

Operating Your Spa
2006 Portable Spa Owner's Manual Page 15
LTR20061000, Rev. A
To switch from the standard heating mode to the economy-heating mode, press the “Temp” button followed by
the “Light” button. Press the same sequence to switch back to the standard heating mode. Once in the economy-
heating mode, Ec will display in the center of the control panel and flash alternately with the water temperature.
NOTE: There is no control panel message displayed while in the standard heating mode; only the actual water
temperature is displayed.
Some spa models are equipped with the exclusive XL Heat Exchanger™, the most efficient spa heater available
anywhere. This highly innovative device heats water faster and more efficiently with no chemical build-up. For
your protection, it includes a High Limit Overheat Protection safety device that prevents spa equipment from
overheating. The XL Heat Exchanger™ works automatically and requires no maintenance.
Jets
Press the “Jets” button:
•
Once to activate the low speed pump
•
Twice to activate the high speed pump
•
Three times to turn off the high-speed
Pump will automatically start at high speed for two seconds every time the pump speed changes from high to
low.
Light
Press the “Light” button to turn on the spa light and again to turn the light off.
Setting the Temperature Lock
This feature allows you to lock a temperature into the system. When engaged the set temperature will blink on
and off when the “Temp” button is pressed. However, you will not be able to change it until you unlock the set
temperature:
•
Press the “Temp” button.
•
Press the “Option” button to unlock the set temperature.
•
Select a temperature with the “Temp” button.
•
Press the “Option” button to set and lock the temperature.
Automatic Time Outs
These features will automatically turn themselves off during periods of continuous use:
•
Low speed pump After 4 hours
•
High-speed pump After 15 minutes
•
Spa light After 15 minute