Cal Spas 2006 Portable spas, Руководство пользователя

Страница: 26 / 96

Operating Your Spa
Page 22 2006 Portable Spa Owner's Manual
LTR20061000, Rev. A
temperature is not current and will alternate with spa temperature if measured temperature is current. Economy
mode will heat the water to the set temperature while Sleep mode, indicated by a “SL” on the main display, will
also only activate the heater during the filtering cycles but will only heat the water to within 20°F (10°C) of the
set temperature. Like Economy mode, “SL” will display solid when temperature is not current and will
alternate with actual temperature when it is current.
NOTE: Displayed temperature will only be current after the pump has been running for at least 2 minutes.
Switching Modes
•
Press “Temp” button followed by the “Light” button.
•
Press the same sequence to switch to the next mode.
Jets
Press the “Jets” button:
•
Once to activate low speed pump.
•
Twice to activate high speed.
•
Three times to return to turn pump off.
Light
Press the “Light” button to turn on the light. Press it once again to turn the light off. All optional lighting such
as the control panel light and cabinet perimeter lighting is controlled by the “Light” button and will turn on and
off with the spa light.
Option
Press the “Option” button to turn on the pump 2 on. Press it once again to turn off the pump 2 off “6200
Controls only”
6300 Controls - Pump 2 and Pump 3 Sequence
•
Press “Option” button once to activate hi speed pump 2
•
Press “Option” button twice to activate hi speed pump3 and hi speed pump 2
•
Press 3 times to activate pump 3 hi speed only
•
Press 4 times to turn pumps off
Note: A separate simplex button will be use for Turbo or air blower operation in 6200/6300 Controls.