CAIRE SAROS 3000, Руководство по обслуживанию

Страница: 48 / 58

Service Manual
48 | MN260 B
7.8.9 MEMBRANE PANEL REPLACEMENT (9731-1-SEQ)
7.8.9.1 After performing steps 7.7.1.1 thru 7.7.1.8 from “INLET CAP REMOVAL”.
7.8.9.2 Peel off the User Panel (9731-1-SEQ) as shown in the
figure below.
Figure 7-73. Peel
7.8.9.3. Clean the surface shown in the figure with isopropyl
alcohol before re-applying the new User Panel.
clean
surface
Figure 7-74. Clean
7.8.9.4 Remove the PSA protective cover from the new User
Panel (9731-1-SEQ). Insert the Flex Cable as shown in the figure
below.
Figure 7-75. Remove PSA cover
7.8.9.5 Position and apply the new User Panel as shown in the
figures below. Press firmly on the entire surface of the new User
Panel to insure that it is bonded correctly.
Figure 7-76. Apply new User Panel
7.8.9.6 Reconnect the small tube (4056-SEQ [2.3”]).
7.8.9.7 Perform steps 6.8.10.4 - 6.8.10.11 from section “INLET CAP INSTALLATION”.