Personal Ambulatory Oxygen System
Provider Technical Manual
16
Buzzer:
An audible alarm (or buzzer) is used to alert you to the operating condition of the device, either a warning or failure, and to
confirm a valid key press by the user.
USER CONTROLS AND SYSTEM STATUS INDICATORS CONT.
Symbol
Definition
Symbol
Definition
No Smoking Icon (button): Do not smoke near unit. Providers can
access provider mode software functions using the Control Panel. All
provider mode information is displayed on the LCD. The software shall
advance the following Eclipse 3 display mode when the “No Smoking”
icon is pressed (see pg. 15).
FAA approved for use aboard passenger aircraft.
ALERT (Yellow) Indicator—Low and Medium Priority Alerts:
When illuminated, this indicates a low priority awareness condition or
Caution. Use of the unit may continue and refer to the Troubleshooting
Table for the proper response. A flashing yellow indicates a medium
priority alert. A prompt response is necessary.
Pulse Mode Operation
ALARM (Red) Indicator —High Priority Alarms: Indicates a high
priority alarm condition. An immediate response is necessary. Refer to
the Troubleshooting Table.
Device operating normally; power button
Flow Setting Indicator: This is the main focus on your control panel.
The home care provider will correctly set the prescribed flow for either
the Continuous Flow Mode (LPM) and/or the Pulse Dose settings (mL).
Each time you power the device ON, the previous mode and/or setting
has been saved and will be used at start-up.
Do not get wet.
Power Cartridge (battery) Status Gauge: This indicator displays
the charge remaining in the battery. Each of the five horizontal gray
bars represents approximately 20% of the total battery charge. When
the battery is being charged, the charge indicator bars will blink in a
waterfall-type fashion.
If the battery is not installed, or if it is improperly installed, the Power
Cartridge (battery) Status Gauge will not be illuminated.
Type B Applied Part (degree of protection against
electric shock)
External Power Indicator: When the Eclipse is properly plugged in
and is using the AC or DC Power Supply, this indicator will appear on
the User Control Panel.
Use no oil or grease.
DC Voltage
No open or naked flames.
Drip Proof Equipment-IPX0: The Eclipse enclosure does not provide
protection against the harmful effects of the ingress of liquids. (IPX0,
per IEC 60529)
No serviceable parts insde. Do not open cover.
Read user manual before operation. See user manual for instructions.
Certified for both the U.S. and Canadian markets, to the
applicable U.S. and Canadian standards.
This symbol is to remind the equipment owners to return it to a
recycling facility at the end of its life, per Waste Electrical and Electronic
Equipment (WEEE) Directive.
This device complies with the requirements of Directive
93/42/EEC concerning medical devices. It therefore bears
the CE marking as shown.
Name and address of manufacturer
Authorized representative in the European Community
