Caen RFID Hex R1290I, Техническое руководство

Страница: 45 / 57

CONFIGURATION USING THE WEB INTERFACE - Hex R1290I Technical Information Manual 45
6 HID PROFILE
Introduction
The Hex reader, when configured in the HID profile and connected via USB to a PC, sends the codes of the detected
tags on the USB port.
For details on the available profiles and on the activation method, please refer to § RFID paragraph page 19
(configuration via reader) or § RFID paragraph page 27 (configuration via web interface).
To configure the reader when using the HID profile it is advisable to refer to the § HID paragraph page 30
(configuration via web interface), because the configuration via reader (§ HID opt. paragraph page 21) permits to
access a restrict number of configuration parameters.
USB Communication Setup
The Hex reader in the HID profile can be connected to a PC using the provided USB cable and it is detected by the PC as
an emulated serial port.
1. Check for the supplied accessories (see § Accessories page 11). Plug the USB cable into your computer and
connect the other end of the USB cable to the reader.
2. Connect the Hex to the power supply, the power LED will turn on, wait about 25 seconds until you hear a beep,
wait 15 seconds again until the screen will inform you that the reader is ready to work with the
HID profile.
Making Inventory
1. Launch a text editing application (or any other application accepting keyboard input).
2. Put tags in the reader read range.
3. On the text editing window you will see the EPCs of the tags.