CONFIGURATION USING THE WEB INTERFACE
-
Hex R1290I Technical Information Manual
28
Easy2read
Choosing the easy2read profile, the RFID Configuration submenu options are the following:
RF Output Power:
the default RF Power is 40%. The RF Power value at power up is expressed as a
percentage value of the maximum RF output power. Through the
RF Output Power
submenu you can set the
power level emitted by the reader.
You can change the default value using the drop-down menu:
5%
10%
20%
40%
60%
80%
100%
The correspondent values are:
Percentage
Conducted Power
(mW)
Radiated Power ETSI
(mW e.r.p.)
Radiated Power FCC
(mW e.r.p.)
5%
25
16
18
10%
50
32
36
20%
100
64
72
40%
200
128
144
60%
300
192
215
80%
400
256
287
100%
500
320
359
Tab. 4.1: Conducted power- radiated power
Note that, when the reader is configured in the easy2read profile, to set the power you can also use the
CAEN RFID Easy Controller Application or the
SetPower
function of the SDK (Software Development Kit)
library.
