Caen RFID Hex R1290I, Техническое руководство

Страница: 29 / 57

CONFIGURATION USING THE WEB INTERFACE - Hex R1290I Technical Information Manual 29

Trigger Button: enable or disable. By default, the Trigger Button is disabled. You can change the default
value using the drop-down menu. Through this option you can enable/disabled the tag inventory at the
press of the trigger button of the reader. When the
Trigger Button is enabled, to perform the tag inventory
just hold down the trigger button and then release.
Note: In the easy2read profile, in order to enable the tag inventory on button press, it is
necessary to perform a second activation via software:
- Using the Easy controller Software: for more details see § Inventory on button press page 43.
or
- Using the API: for more details see the EventInventoryTag Method (the event trigger flag , bit
5, set to 1) in the CAEN RFID API Reference Manual downloadable from Hex R1290I web
page , Documents section or in the Manual and Documents web area.

Proximity Sensor Trigger: enable or disable. By default, the Proximity Sensor Trigger is disabled. You can
change the default value using the drop-down menu. When the Proximity Sensor is enabled, the reader
performs a tag inventory when he perceives a decrease in brightness due to the passage of a tag. Note that
the sensor is also sensitive to the change in brightness due to the turning off of the light or the passage of a
shadow.
Note: In the easy2read profile, in order to enable the proximity sensor, it is necessary to perform
a second activation via software:
- Using the Easy controller Software: for more details see § Inventory on button press page 43.
or
- Using the API: for more details see the EventInventoryTag Method (the event trigger flag , bit
5, set to 1) in the CAEN RFID API Reference Manual downloadable from Hex R1290I web
page , Documents section or in the Manual and Documents web area.

Tag ID Beep: enable or disable. By default, the Tag ID beep is disabled. You can change the default value
using the drop-down menu. If the Tag ID beep is enabled, the reader will beep when a tag is detected.

Tag ID Lights: enable or disable. By default, the Tag ID lights are disabled. You can change the default value
using the drop-down menu. If the Tag ID Lights are enabled, the reader will lights up when a tag is detected.

Tag Count: enable or disable. By default, the Tag Count is disabled. You can change the default value using
the drop-down menu. If the Tag Count is enabled, when the reader performs a tag inventory, the reader
display shows the number of read tags.
Warning: To save the changes click on the “ SAVE ” button. Note that all changes made via the web
interface are active only after the reboot of the reader. Click on SYSTEM option in the Web Interface panel
and then click on the “Reboot” button. After reboot, the new settings are active.