Cadillac XT4 Owner Manual (GMNA-Localizing-Europe-16412942) - 2023 -
CRC - 5/25/22
Seats and Restraints
73
route the tether under the headrest
or head restraint and around the
headrest or head restraint posts.
If the child restraint is installed next
to a centre seat, make sure the top
tether does not interfere with the
centre seating position shoulder belt/
retractor. If it does, find another
suitable seating position to install the
child restraint.
3. Make sure the child restraint top tether
hook is completely closed and secured to
the top tether anchor.
Head Restraint Removal and
Reinstallation
The second row outboard head restraints
can be removed if they interfere with the
proper installation of the child restraint.
To remove the second row head restraint:
1. Partially fold the backrest forward. See
for additional
information.
2. Press both buttons on the head restraint
posts at the same time, and pull up the
head restraint.
3. Store the head restraint in a secure
place.
4. When the child restraint is removed,
reinstall the head restraint before the
seating position is used.
{
Warning
With head restraints that are not
installed and adjusted properly, there is a
greater chance that occupants will suffer
a neck/spinal injury in a crash. Do not
(Continued)
Warning (Continued)
drive until the head restraints for all
occupants are installed and adjusted
properly.
To reinstall the head restraint:
1. Insert the head restraint posts into the
holes in the top of the backrest. The
notches on the posts should face the
driver side of the vehicle.
2. Push the head restraint down.
If necessary, press the height adjustment
release button to further lower the head
restraint. See
.