Cadillac XT4 Owner Manual (GMNA-Localizing-Europe-16412942) - 2023 -
CRC - 5/25/22
Driving and Operating
217
sensors clean of mud, dirt, snow, ice, and
slush; and clean sensors after a car wash in
freezing temperatures. Sensors that are not
clean may not detect objects or may cause
the system to alert when not required.
{
Warning
The Park Assist System is no substitute
for careful and attentive driving. The Park
Assist system does not detect children,
pedestrians, cyclists, animals, or objects
located below the bumper or that are too
close or too far from the vehicle. It is not
available at speeds greater than 9 km/h
(6 mph). To prevent injury, death,
or vehicle damage, even with Park Assist,
always check the area around the vehicle
and check all mirrors before moving
forward or reversing.
How the System Works
The vehicle may have a Park
Assist amphitheatre-like display on the
cluster with bars that represent the
estimated location of a detected object and
the vehicle's distance from the object. As a
detected object gets closer, more bars light
up and change colour from yellow to amber
to red.
When an object is first detected in the rear,
one beep will be heard from the rear, or the
driver's seat will pulse two times,
if equipped with Safety Alert Seat. When an
object is very close, five beeps will sound
from the front or rear (depending on the
object's location), or the driver's seat will
pulse five times. Beeps for front are higher
pitched than the rear.
Turning the System On and Off
The Park Assist System can be turned on or
off using the infotainment system. To view
available settings for this feature, touch the
Settings icon on the infotainment home
page. Select
“
Vehicle
”
to display the list of
available options and select
“
Collision/
Detection Systems
”
.
The
X
button is used to turn on or off
the Park Assist, which also turns the
Reversing Warning and Reverse Automatic
Braking (RAB) on or off at the same time.
When the system is turned off, a system off
message is shown on the display. This
message disappears after a short period
of time.
Turn off Park Assist when towing a trailer
and when a bike rack is attached to prevent
unwanted beeps and to ensure proper
operation.
When the System Does Not Seem to Work
Properly
If a service message displays, check the
following conditions:
.
The sensors may not be clean. Keep the
vehicle's front and rear bumpers free of
mud, dirt, snow, ice and slush. For
cleaning instructions, see
.
.
The Park Assist sensors may be covered
by frost or ice. Frost or ice can form
around and behind the sensors and may
not always be seen; this can occur after
washing the vehicle in cold weather. The
message may not clear until the frost or
ice has melted.