Cadillac XT4 Owner Manual (GMNA-Localizing-Europe-16412942) - 2023 -
CRC - 5/25/22
Vehicle Care
273
Front Wiper Blade Replacement
To replace the wiper blade assembly:
1. Pull the windscreen wiper assembly
away from the windscreen.
2. Lift up on the latch in the middle of the
wiper blade where the wiper arm
attaches.
3. With the catch open, pull the wiper
blade down towards the windscreen far
enough to release it from the J-hooked
end of the wiper arm.
4. Remove the wiper blade.
5. Reverse Steps 1
–
3 for wiper blade
replacement.
Rear Wiper Blade Replacement
To remove the wiper blade:
1. Put the vehicle in accessory mode and
turn on the rear windscreen wiper. The
wiper will stop pointing down. See
.
2. Push ENGINE START/STOP to turn the
vehicle off.
3. Lift the wiper arm away from the
window.
4. Push the release lever (2) to disengage
the hook and push the wiper arm (1) out
of the blade assembly (3).
5. Push the new blade assembly securely
on the wiper arm until the release lever
clicks into place.
6. Start the engine and the rear wiper will
return to its normal position.
Windscreen Replacement
HUD System
The windscreen is part of the HUD system.
If the windscreen needs to be replaced,
make sure you get one that is designed for
HUD or the HUD image may look out of
focus.
Driver Assistance Systems
If the windshield needs to be replaced and
the vehicle is equipped with a front camera
sensor for the Driver Assistance Systems, a
GM replacement windshield is
recommended. The replacement windshield
must be installed according to GM
specifications for proper alignment. If it is
not, these systems may not work properly,
they may display messages, or they may
not work at all. See your dealer for proper
windshield replacement.
Acoustic Windscreen
The vehicle is equipped with an acoustic
windscreen. If the windscreen needs to be
replaced be sure to get an acoustic
windscreen so you will continue to have the
benefits an acoustic windscreen can provide.