Cadillac XT4 Owner Manual (GMNA-Localizing-Europe-16412942) - 2023 -
CRC - 5/25/22
304
Vehicle Care
25. Dispose of the used tyre sealant
canister (4) at a local dealer or in
accordance with local state codes and
practices.
26. Replace it with a new canister available
from your dealer.
27. After temporarily sealing a tyre using
the tyre sealant and compressor kit, take
the vehicle to an authorised dealer
within 161 km (100 mi) of driving to have
the tyre repaired or replaced.
Using the Tyre Sealant and Compressor
Kit without Sealant to Inflate a Tyre
(Not Punctured)
The kit includes:
1. Sealant Canister Inlet Valve
2. Sealant/Air Hose
3. Base of Sealant Canister
4. Tyre Sealant Canister
5. On/Off Button
6. Slot on Top of Compressor
7. Pressure Deflation Button
8. Pressure Gauge
9. Power Plug
10. Air Only Hose
If a tyre goes flat, avoid further tyre and
wheel damage by driving slowly to a level
place. Turn on the hazard warning flashers.
See
.
See
for other
important safety warnings.
1. Remove the compressor from its storage
location. See
2. Remove the air only hose (10) and the
power plug (9) from the bottom of the
compressor.
3. Place the compressor on the ground near
the flat tyre.
Make sure the tyre valve stem is
positioned close to the ground so the
hose will reach it.
4. Remove the valve stem cap from the flat
tyre by turning it anticlockwise.
5. Attach the air only hose (10) to the tyre
valve stem by turning it clockwise until
tight.
6. Plug the power plug (9) into the
accessory power outlet in the vehicle.
Unplug all items from other accessory
power outlets. See
.
If the vehicle has an accessory power
outlet, do not use the cigarette lighter.
If the vehicle only has a cigarette lighter,
use the cigarette lighter.
Do not pinch the power plug cord in the
door or window.