
Cadillac XT4 Owner Manual (GMNA-Localizing-Europe-16412942) - 2023 -
CRC - 5/25/22
302
Vehicle Care
4. Attach the air only hose (10) to the
sealant canister inlet valve (1) by turning
it clockwise until tight.
5. Slide the base of the tyre sealant
canister (3) into the slot on the top of
the compressor (6) to hold it upright.
Make sure the tyre valve stem is
positioned close to the ground so the
hose will reach it.
6. Remove the valve stem cap from the flat
tyre by turning it anticlockwise.
7. Attach the sealant/air hose (2) to the
tyre valve stem by turning it clockwise
until tight.
8. Plug the power plug (9) into the
accessory power outlet in the vehicle.
Unplug all items from other accessory
power outlets. See
If the vehicle has an accessory power
outlet, do not use the cigarette lighter.
If the vehicle only has a cigarette lighter,
use the cigarette lighter.
Do not pinch the power plug cord in the
door or window.
9. Start the vehicle. The vehicle must be
running while using the air compressor.
10. Press the on/off button (5) to turn the
tyre sealant and compressor kit on.
The compressor will inject sealant and air
into the tyre.
The pressure gauge (8) will initially show
a high pressure while the compressor
pushes the sealant into the tyre. Once
the sealant is completely dispersed into
the tyre, the pressure will quickly drop
and start to rise again as the tyre
inflates with air only.
11. Inflate the tyre to the recommended
inflation pressure using the pressure
gauge (8). The recommended inflation
pressure can be found on the Tyre and
Loading Information label. See
.
The pressure gauge (8) may read higher
than the actual tyre pressure while the
compressor is on. Turn the compressor