Instrumentation and Controls
. . . 70
To calibrate the compass, do the
following:
1. Drive to a flat, open area, like
a large, empty parking lot.
You need to be able to drive
safely in circles. Be sure the
place is away from power lines
or large metal buildings.
2. Make sure the compass is set
to the correct variance zone.
See "Compass Variance" later
in this section for more infor-
mation.
3. Press
repeatedly until
PRESS
TO CALIBRATE
COMPASS
(press
to cali-
brate compass) is displayed.
4. Press the
button to start
calibrating the compass.
CALIBRATING: DRIVE IN CIR-
CLES
(calibrating: drive
in circles) will appear on the
display.
5. Drive your vehicle in tight
360° circles at a speed of
8 km/h or less until
CALIBRA-
TION COMPLETE
(calibration
complete) appears on the dis-
play for a few seconds.
When the compass is calibrated,
the system will return to the
previous menu.
$10araEscaladeEXT Page 70 Wednesday, October 14, 2009 9:54 AM