Service and Maintenance
. . . 316
6. The level should be within the
hot cross-hatched area.
If the level is not within the hot
cross-hatched area, add or
drain fluid as necessary to
bring the level into the middle
of the hot cross-hatched area.
Reinstall the dipstick.
Note:
• When adding fluid, be careful
not to overfill.
Generally, less than 0.5 L of
fluid is needed.
• When fluid is added, it may
take 15 minutes or more
before an accurate reading is
obtained.
• When reinstalling the
dipstick, make sure to flip the
handle back down to lock the
dipstick in place.
Transfer Case Lubricant
Check the fluid at the intervals
recommended in your Mainte-
nance Schedule.
See the "Recommended Fluids and
Lubricants" chart later in this
section to determine what kind of
fluid to use.
COLD
HOT
$10araEscaladeEXT Page 316 Wednesday, October 14, 2009 9:54 AM