Tune/Sel (Select) Knob and Seek/Scan
Switch Functions
This area of the screen tells you what functions are
available for the TUNE/SEL knob and SEEK/SCAN
switch for the currently active screen. Only the
highlighted functions are available for use, and the
functions vary from screen to screen. The curved double
arrow function is associated with the TUNE/SEL knob.
The solid dot function is associated with pressing
the TUNE/SEL knob. The double-headed arrow function
is associated with the SEEK/SCAN switch.
For example, on the Radio screen shown previously,
you can tune to different stations manually by turning the
TUNE/SEL knob. To access the FM Menu, you press
the knob once. To seek up or down, press the right
or left arrow on the SEEK/SCAN switch. To scan
stations up or down, press and hold the SEEK/SCAN
switch until Scan appears on the display. Radio
also appears on the display as the title of the currently
active screen.
Multi-Function Buttons
These buttons are called multi-function buttons because
the function of each button changes depending upon
which screen is active. The dotted multi-function buttons,
located to the right of the display, control the six prompts
at the right of the screen. When the Radio screen is
active as shown in the previous example, these buttons
represent the programmed preset radio stations for
each band (AM, FM1, FM2, XM1, XM2), but when
Navigation is active, these buttons represent other
functions. See
Navigation Menu on page 2-10 for more
information.
If you see a triangle or carat in the upper left corner of
the prompt, it means that the multi-function button is
programmable. Once the function you want is active,
press and hold the button until you hear a beep.
The new function will be programmed and displayed as
the prompt for that multi-function button. For more
information on programming the multi-function buttons
for preset radio stations, see “Setting Preset Stations”
under
Navigation Audio System on page 3-2.
1-7
