AVC (Automatic Volume Compensation): This
feature is only available on the Bose
®
system. This
feature monitors the noise in the vehicle. Then,
AVC automatically adjusts the volume level so that it
always sounds the same to you. AVC works best when
listening at low volume levels. At louder listening
levels there will be little or no effect.
To turn AVC on and off, press the AVC multi-function
button.
Setting Preset Stations
The six multi-function buttons next to the display allow
you to store your favorite radio stations. You can set up
to 30 different preset stations, six per band, AM, FM1,
FM2, XM1, and XM2 (USA only, if equipped). The Home
and Away presets each have 30 separate presets.
For more information on the Home and Away feature,
see “FM Menu” listed previously in this section.
To store a radio station as a preset, use the
following steps:
1. Select the band where you want the preset stored
by pressing the BAND button.
2. Select either the Home or Away presets. See “FM
Menu” listed previously in the section for more
information on the Home and Away feature.
3. Tune to the desired station using the TUNE/SEL
knob or the SEEK/SCAN switch.
4. Choose the equalization and DSP settings
you want.
See “Setting the Tone” listed previously for more
information.
5. Press and hold the multi-function button next to the
preset you want.
You will hear a beep when the preset has been
stored, and the frequency of the stored station will
appear on the preset prompt at the right of the
display.
6. Repeat the steps to store other presets.
To select a stored preset station listed on the screen,
press the multi-function button next to the station
prompt. The station will change, and the new radio
station frequency will be displayed in the center of the
screen.
3-12
