After receiving the beamed data, the screen will display
this data. A search must be performed to find the
matching data in the navigation database. Turn the
TUNE/SEL knob to select a field to search, then press
the Search multi-function button. Search will be
highlighted if the field is searchable.
You may be requested to select a city or street to
narrow the search. After successfully finding the match
in the navigation database, you can use the
multi-function buttons to map, set the destination or
calculate the route.
If the data cannot be found in the navigation database,
a message “no data found” will be displayed. If this
occurs, select another field to search. Repeat this
process until all search fields have been checked or a
match is found.
You may also select information from the All POI
(Points of Interest) or Nearby POI menus to send to
your Palm using the INFO button.
A second way to access the Beam screen is through
the Address Book screen. See “Address Book”
under
Main Menu on page 1-6 for more information.
All POI (Points of Interest)
This option allows you to choose a destination from
the all points of interest list. See “Points of Interest
Categories” later in this section for the complete list.
There are four ways to limit a search for a point
of interest from this screen:
•
Choose a city, village, township or county.
•
Choose a state.
•
Choose a category.
•
Enter the name of the POI.
To enter the city of a POI, the state of a POI or a POI
category, use the following steps:
1. Press either the City, State or Category
multi-function button.
2. Enter the name of the city, state or POI category
using the alpha-numeric bar. To limit the search of
a point of interest, the city or category must be
entered first.
As you enter the item, the system will search for a
match. Select the correct point of interest from
the list.
2-25
