Go Home
This option will take you to the destination you stored as
Home (first stored point). See “Stored PTs” earlier in
this section for more information.
Stored Points
This option allows you to select a destination from your
stored points list.
Stored Trips
This option allows you to select a destination from your
stored trips list.
Intersection
This option allows you to select a destination by
inputting the intersecting roads. When you select
Intersection, the alpha-numeric bar will appear to allow
you to input the name of the first street. This should
bring up a list of cities that have a street with that name.
Select the correct city and then the system will allow
you to enter the second street. You will only be able to
input streets that intersect with the first. After you
have entered the second street, the route will be
calculated and a voice prompt will come on to direct you
to “Proceed to the highlighted route.”
Some cities have multiple listings for a particular street.
If you do not see the second street, press the back
multi-function button and select another entry for the
first street.
Phone
This option allows you to select a destination by
inputting the phone number.
When you select Phone, the alpha-numeric bar will
appear to allow you to enter the phone number of your
destination. Once the phone number has been
entered, the multi-function button can be used to map,
set the destination or calculate the route to this
destination.
If the phone number cannot be found, an error message
“no phone number is available” will be displayed.
Previous Origin
This option allows you to return to the place where you
started your last planned route. Only one previous
origin can be stored at a time by the system. Once you
enter a new route, the previous origin will be changed.
2-23
